Harman Kardon FESTIVAL 2 Owners Manual - Page 16

AUTOMATIC PLAY 1. Insert the automatic spindle fully into the center hole by rotating the spindle until the side projection is engaged in the locking slot. 2. Lift the stabilizer arm and swing it to the right. 3. Stack up to six records on the spindle, holding the records with the left hand while positioning the stabilizer arm over the records. 4. Set the control knobs for the correct record size and speed. 5. Make sure the cueing lever is in the down position. 6. Slide the control knob from the OFF position to the REJ position, holding it there momentarily until the turntable starts to revolve. 7. After the last record has finished playing, the tone arm will return to its locking rest and the changer will shut off automatically. MANUAL PLAY 1. Lift the stabilizer arm and swing it to the right. 2. Insert the short manual spindle. 3. Place a single record on the turntable. 4. Return the stabilizer arm to the center of the turntable. 5. Slide the control knob from the OFF position to the Man/ ON position. 6. Using the cueing lever, raise the tone arm and position the stylus over the desired point on the record. 7. Lower the cueing lever gently until the stylus enters the assigned groove. Record changer AUTOMATIC SPINDLE CENTER HOLE WITH LOCKING SLOT MAIN PLATE TURNTABLE PLATTER CONTROL KNOB (SIZE SELECTOR) STYLUS 8. When the record has finished playing, the tone arm will return to its locking rest and the changer will shut off automatically. 9: If you wish to have the record repeat continuously, omit step 4. MANUAL SPINDLE STABILIZER ARM CUEING LEVER CONTROL KNOB (SPEED SELECTOR) TONE ARM LOCKING REST CONTROL KNOB 15