Harman Kardon HK3500 Owners Manual - Page 13

Using the Preset Buttons Your receiver allows you to store 16 station settings and quickly access them, using the 8 Preset buttons along with the Shift A-B button. The Preset stations are designated by the letter A or B, followed by a number from 1 to 8. Any designation may be used for any AM or FM station, in whatever combination you choose. To enter a station in memory: 1. Tune to the desired station. 2. Be sure Seek-Stereo setting is the one desired*. 3. Press the Shift A-B button to display the desired letter. 4. Press the Memory button. ("Preset" will flash for about 8 seconds.) 5. With "Preset" flashing, press the desired numbered Preset button. *NOTE: When a station is set in memory, the Seek-Stereo setting is also entered. Subsequently, each time a station is recalled using a Preset button, the tuner automatically switches to the original SeekStereo setting for that station. Memory Shift A-B To change a preset station: Simply enter the new station. The old station is automatically erased. To access a preset station: Press the Shift A-B button to display the correct letter. Then press the desired numbered Preset button. NOTE: Preset stations are stored indefinitely while the unit is connected to a live AC source, and for approximately 1 week when the unit is unplugged. Making a Recording Press the "Rec Out" button corresponding to the component you wish to record from. Recording may be made on tape deck 1 or 2, or both simultaneously. You may also record from either tape deck to the other. NOTE: By selecting different sources for Function and Rec Out, you may listen to one stereo component while recording from another. Tape 1 Function I Rec Out I Tape 2 I I 12