Harman Kardon HK495I Owners Manual - Page 3

Features, General, Instructions

Page 3 highlights

FEATURES ■ HCC (High-instantaneous Current Capability) Recent studies have shown that while reproducing dynamic music signals the instantaneous impedances of nearly al l loud-speakers drop to less than one third of the nominal ratings. These low instantaneous impedances typically require 3 to 6 times more current than an 8 Ohm resistive load. Reduced dynamic range and increased distortion wi l l result if the amplifier cannot provide these higher currents. For this reason, the hk495i was designed to provide 18 amperes of instantaneous current. ■ Ultrawide Bandwidth The bandwidth of this unit is exceptionally wide and independent of negative feedback. This improves transient accuracy and phase l inearity. ■ Low Negative Feedback This unit has been designed to have low distortion and wide bandwidth without high negative feedback. This further improves its dynamic accuracy. ■ Discrete Component Circuitry In order to achieve the above goals, all discrete electronic circuitry has been employed. Al l available integrated circuits could not provide this high level of performance. ■ Active/Passive Phono Section Unique circuitry provides precise passive RIAA equalization (without negative feedback). Then the same low level of negative feedback is applied at all frequencies from 20Hz-20kHz, resulting in improved transient accuracy. ■ Sophisticated Electronic Protection Harman Kardon engineers developed a unique protection system that permits high instantaneous current to be driven into speaker systems but protects the amplifier from shortcircuited or damaged speakers and wires. This protection system in no way limits amplifier output voltage or current during music reproduction, and therefore has no negative effect on sound quality. ■ Digital Synthesized Quartz-locked Tuning Quartz-locked tuning accuracy eliminates drifting and mistuning, thereby guarantying optimum sound quality. Eight AM and eight FM stations can be simultaneously stored in the memory. They wi l l remain for one week even if there is a loss of power. ■ Constructed for Audio Purity The internal wiring, layout and materials have been chosen to minimize noise, hum and interaction of the various circuits. GENERAL INSTRUCTIONS Always Use at 120V AC This unit is designed for operation with 120V AC. Connect only to domestic AC outlets. Never connect the unit to an outlet supplying a higher voltage. This may create a fire hazard. Handle the Power Cord Gently •Do not disconnect the plug from the AC outlet by pulling the cord; always pull the plug itself. Pul l ing the cord may break the wire. •If you do not intend to use your unit for any considerable length of time, disconnect the plug from the AC outlet. •Do not place furniture or other heavy objects on the cord, and avoid dropping heavy objects on it. Also do not make a knot in the power cord. Not only maythe cord be damaged, it can also cause a short circuit and a consequent fire hazard. Place of Installation Place your unit on a firm and level surface. Avoid instal l ing your unit under the following conditions: ►Moist or humid places. ►Places exposed to direct sunlight or close to heating equipment. ►Extremely cold locations such as those in the direct draft from an air conditioner. ►Places subject to excessive vibration or dust. ►Poorly ventilated places. Do not cover the ventilation slots on the top of the unit. This wil l cause the temperature inside the unit to rise, which can eventually effect the reliabil ity of your unit. Moving the Unit Before moving the unit, be sure to unplug the power cord from the AC outlet and disconnect the interconnection cords to other units. Do Not Open the Cabinet To prevent fire or shock hazard, do not tamper with internal components for inspection or maintenance. Harman Kardon does not guarantee against performance degradation resulting from any modification. If water, a hairpin or wire accidentally enters the unit, immediately unplug the power cord from the AC outlet to prevent shock and consult an authorized Harman Kardon service station. If you use the unit under this condition, it may cause a fire or shock hazard. Cleaning When the unit gets dirty, wipe it with a soft dry cloth. If necessary, wipe it with a soft cloth dampened with mi ld soapy water and then wipe with a dry cloth. Never use benzine, thinner, alcohol or other volatile agent, and avoid spraying an insecticide near the unit. 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11

FEATURES
GENERAL
INSTRUCTIONS
HCC
(High
-instantaneous
Current
Capability)
Recent
studies
have
shown
that
whi
le
reproducing
dynamic
music
signals
the
instantaneous
impedances
of
nearly
al
l
loud
-speakers
drop
to
less
than
one
third
of
the
nominal
ratings.
These
low
instantaneous
impedances
typically
require
3
to
6
times
more
current
than
an
8
Ohm
resistive
load.
Reduced
dynamic
range
and
increased
distortion
wi
l
l
result
if
the
amplifier
cannot
provide
these
higher
currents.
For
this
reason,
the
hk495i
was
designed
to
provide
18
amperes
of
instantaneous
current.
Ultrawide
Bandwidth
The
bandwidth
of
this
unit
is
exceptional
ly
wide
and
inde-
pendent
of
negative
feedback.
This
improves
transient
accuracy
and
phase
l
inearity.
Low
Negative
Feedback
This
unit
has
been
designed
to
have
low
distortion
and
wide
bandwidth
without
high
negative
feedback.
This
further
improves
its
dynamic
accuracy.
Discrete
Component
Circuitry
In
order
to
achieve
the
above
goals,
al
l
discrete
electronic
circuitry
has
been
employed.
Al
l
avai
lable
integrated
circuits
could
not
provide
this
high
level
of
performance.
Active/Passive
Phono
Section
Unique
circuitry
provides
precise
passive
RIAA
equal
ization
(without
negative
feedback).
Then
the
same
low
level
of
negative
feedback
is
appl
ied
at
al
l
frequencies
from
20Hz-20kHz,
resulting
in
improved
transient
accuracy.
Sophisticated
Electronic
Protection
Harman
Kardon
engineers
developed
a
unique
protection
system
that
permits
high
instantaneous
current
to
be
driven
into
speaker
systems
but
protects
the
ampl
ifier
from
short-
circuited
or
damaged
speakers
and
wires.
This
protection
system
in
no
way
l
imits
ampl
ifier
output
voltage
or
current
during
music
reproduction,
and
therefore
has
no
negative
effect
on
sound
qual
ity.
Digital
Synthesized
Quartz
-locked
Tuning
Quartz
-locked
tuning
accuracy
el
iminates
drifting
and
mistuning,
thereby
guarantying
optimum
sound
qual
ity.
Eight
AM
and
eight
FM
stations
can
be
simultaneously
stored
in
the
memory.
They
wi
l l
remain
for
one
week
even
if
there
is
a
loss
of
power.
Constructed
for
Audio
Purity
The
internal
wiring,
layout
and
materials
have
been
chosen
to
minimize
noise,
hum
and
interaction
of
the
various
circuits.
Always
Use
at
120V
AC
This
unit
is
designed
for
operation
with
120V
AC.
Connect
only
to
domestic
AC
outlets.
Never
connect
the
unit
to
an
outlet
supplying
a
higher
voltage.
This
may
create
a
fire
hazard.
Handle
the
Power
Cord
Gently
•Do
not
disconnect
the
plug
from
the
AC
outlet
by
pul
ling
the
cord;
always
pull
the
plug
itself.
Pul
l
ing
the
cord
may
break
the
wire.
•If
you
do
not
intend
to
use
your
unit
for
any
considerable
length
of
time,
disconnect
the
plug
from
the
AC
outlet.
•Do
not
place
furniture
or
other
heavy
objects
on
the
cord,
and
avoid
dropping
heavy
objects
on
it.
Also
do
not
make
a
knot
in
the
power
cord.
Not
only
maythe
cord
be
damaged,
it
can
also
cause
a
short
circuit
and
a
consequent
fire
hazard.
Place
of
Installation
Place
your
unit
on
a
firm
and
level
surface.
Avoid
instal
l
ing
your
unit
under
the
following
conditions:
►Moist
or
humid
places.
►Places
exposed
to
direct
sunl
ight
or
close
to
heating
equipment.
►Extremely
cold
locations
such
as
those
in
the
direct
draft
from
an
air
conditioner.
►Places
subject
to
excessive
vibration
or
dust.
►Poorly
venti
lated
places.
Do
not
cover
the
venti
lation
slots
on
the
top
of
the
unit.
This
wi
l
l
cause
the
temperature
inside
the
unit
to
rise,
which
can
eventual
ly
effect
the
rel
iabi
l
ity
of
your
unit.
Moving
the
Unit
Before
moving
the
unit,
be
sure
to
unplug
the
power
cord
from
the
AC
outlet
and
disconnect
the
interconnection
cords
to
other
units.
Do
Not
Open
the
Cabinet
To
prevent
fire
or
shock
hazard,
do
not
tamper
with
internal
components
for
inspection
or
maintenance.
Harman
Kardon
does
not
guarantee
against
performance
degrada-
tion
resulting
from
any
modification.
If
water,
a
hairpin
or
wire
accidental
ly
enters
the
unit,
immediately
unplug
the
power
cord
from
the
AC
outlet
to
prevent
shock
and
consult
an
authorized
Harman
Kardon
service
station.
If
you
use
the
unit
under
this
condition,
it
may
cause
a
fire
or
shock
hazard.
Cleaning
When
the
unit
gets
dirty,
wipe
it
with
a
soft
dry
cloth.
If
necessary,
wipe
it
with
a
soft
cloth
dampened
with
mi
ld
soapy
water
and
then
wipe
with
a
dry
cloth.
Never
use
benzine,
thinner,
alcohol
or
other
volati
le
agent,
and
avoid
spraying
an
insecticide
near
the
unit.
2