Harman Kardon HKTS 16 Owners Manual - Page 9
Connecting the Subwoofer to a Receiver or Preamp/Processor with, Line Outputs
View all Harman Kardon HKTS 16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
ENGLISH HKTS 9/16 Front Left Speaker Cable (White Bands) Center Speaker Cable (Green Bands) Speaker Connections Front Right Speaker Cable (Red Bands) +- +- FRONT +- SURROUND RIGHT LEFT +- Receiver CENTER +- LINE-LEVEL OUTPUTS LR Set Input Mode Switch to "Normal" Subwoofer Surround Left Speaker Cable (Blue Bands) Surround Right Speaker Cable (Gray Bands) Stereo Audio Cable (Not supplied, Red and White Ends) Connecting the Subwoofer to a Receiver or Preamp/Processor with Line Outputs Use this installation method for receivers and preamp/processors that do not have a dedicated subwoofer output but do have preamp-level (volume-controlled) line outputs. If the receiver or preamp/processor has a dedicated subwoofer output with low-pass filtering, see Connecting the Subwoofer to a Receiver or Preamp/Processor with a Dedicated Subwoofer Output, on page 8. If you're connecting to a receiver with left and right line outputs, connect the LFE (purple) connector of the supplied combination LFE and trigger cable to one of those outputs and to either of the HKTS 210SUB's Line-Level L/R In connectors 7. Use a second RCA cable (not supplied) to connect the other receiver or preamp line output to the other of the HKTS 210SUB's Line-Level L/R In connectors 7. Set the subwoofer's Input Mode switch 4 in the "Normal" position. Connect each satellite speaker and the center speaker to the corresponding speaker terminals on your receiver or amplifier. After you have made and verified all connections, plug the HKTS 210SUB's AC Power cord 9 into an active AC outlet. 9