Harman Kardon RPM650 Owners Manual - Page 4

Components and Their Functions STEREO HEADPHONES JACK (headphones) For connection of stereo headphones. Output signal is always supplied to this jack. SPEAKER SELECTORS (speakers 1, speakers 2) For selection of speakers to be sounded. 2 speaker systems can be connected to this unit. When listening to speaker sound, depress the corresponding selector. To sound both speaker systems, depress both switches. Release the switch to listen with headphones only. POWER SWITCH (POWER) For power on and off. When this switch is pressed after AC cord connection to an outlet, the DISPLAY panel indicates "on" in red color. Press this switch again to turn the power off. fL BASS CONTROL KNOB (BASS) For emphasis or attenuation of low-pitched tone. Turn it clockwise for emphasis, or counterclockwise for attenuation. 0 TONE DEFEAT SWITCH (tone defeat) For defeating tone control by TONE CONTROL knobs (BASS, TREBLE). At the depressed position, flat frequency characteristic is obtained irrespective of TONE CONTROL knob positions. (3 TREBLE CONTROL KNOB (TREBLE) For emphasis or attenuation of high-pitched tone. Turn it clockwise for emphasis, or counterclockwise for attenuation. 0 BALANCE CONTROL KNOB (BALANCE) For balance adjustment between left and right channels. Normally place it at the center position. MODE SELECTOR (MODE) MONO position : Select this position for a monaural source program. STEREO position: Select this position for stereo playback, reception or recording. REVERSE position: Select this position to reverse the right and left channel signals. 4 )a