Harman Kardon RPM650 Owners Manual - Page 8
Operation, Procedures
View all Harman Kardon RPM650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Operation Procedures Listening to a tuner 1. Turn the VOLUME CONTROL knob to the minimum level and press the POWER switch. The "on" indicator illuminates in red color. 2. Press the TUNER FUNCTION selector and check that the "tuner" indicator illuminates in green color. tape monitor 1 2 aux tuner phono tuner ElICICH- 1171 3. Be sure that the TAPE MONITOR 1 and 2 switches are off. 4. Place the TAPE OUT switch at its OFF position. TAPE OUT L1,02 copy-2 tol 0" sou'rce illo' ' 8. Place the CAP. TRIM knob at the proper position according to the cartridge capacitance only when the CARTRIDGE selector is placed at the MM position. 9. Start the turntable and lower the tonearm. 10. Gradually turn the VOLUME CONTROL knob to increase the sound volume to the desired level. 11. If the record is warped, depress the SUBSONIC FILTER switch. subsonic 12. Adjust the BASS, TREBLE and BALANCE CONTROL knobs to obtain the desired tone. 5. Depress the SPEAKER selector for the speakers to be sounded. 6. Tune the tuner to the desired station according to its owner's manual. 7. Place the MODE selector at its MONO or STEREO position according to the desired broadcasting station to be tuned. 8. After perfect tuning, adjust the VOLUME, BASS, TREBLE and BALANCE CONTROL knobs to obtain the desired tone. Listening to a turntable 1. Turn the VOLUME CONTROL knob to the minimum level and press the POWER switch. The "on" indicator illuminates in red color. 2. Press the PHONO FUNCTION selector and check that the "phono" indicator illuminates in green color. tape monitor 1 2 FFUNCTION-i aux tuner phono photo E]E]ElEini 3. Be sure that the TAPE MONITOR 1 and 2 switches are off. 4. Place the TAPE OUT selector at its OFF position. 5. Depress the SPEAKER selector for the speakers to be sounded. 6. Place the MODE selector at its MONO or STEREO position according to the type of the record to be played. 7. Place the CARTRIDGE selector at the MM or MC position according to the PHONO INPUT jacks to which the turntable is connected. 8 Tape playback 1. Turn the VOLUME CONTROL knob to the minimum level and press the POWER switch The "on" indicator illuminates in red color. 2. Press the TAPE MONITOR 1 or 2 switch correspond- ing to the TAPE INPUT jacks to which the playing tape deck is connected, and check that "tape 1" or "tape 2" indicator illuminates in red color. tape monitor -FUNCTION- 1 1 2 aux tuner phono repel I- 10C10E 3. Place the TAPE OUT switch at its OFF position. 4. Depress the SPEAKER selector for the speakers to be sounded. 5. Place the MODE selector at its MONO or STEREO position according to the type of the tape to be played back. 6. Mount a recorded tape on the selected tape deck and set the tape deck to playback mode according to the owner's manual of the tape deck. 7. Gradually turn the VOLUME CONTROL knob until the desired sound volume is obtained. 8. Adjust the BASS, TREBLE and BALANCE CONTROL knobs until the desired tone is obtained. 9 Depress the HIGH CUT FILTER switch to cut off tape hissing sound. high cur on