Harman Kardon RPM650 Owners Manual - Page 5
Input/output
View all Harman Kardon RPM650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
DISPLAY PANEL (on / tape 1 / tape 2 / aux / tuner / phono) The DISPLAY panel indicates the current status of the unit. itr) TAPE MONITOR SWITCHES (tape monitor 1, 2) For monitoring the equalizer or tape deck connected to the TAPE 1 INPUT/OUTPUT jacks or TAPE 2 INPUT/OUTPUT jacks. The monitored tape deck is displayed as "tape 1" or "tape 2" in red color on the DISPLAY panel. '< kif ' II • • • \ .6. 9' K .. ..X . .a s 4x* aka ,„ FUNCTION SELECTORS (FUNCTION) AUX switch : Press this switch to select the program source connected to the AUX INPUT jacks. TUNER switch : Press this switch to select the tuner connected to the TUNER INPUT jacks. PHONO switch : Press this switch to select the turntable connected to the PHONO INPUT 1 or 2 jacks. The selected function is indicated as "aux", "tuner" or "phone" in green color on the DISPLAY panel. CAPACITANCE TRIM SELECTOR (CAP. TRIM) For adjustment of the capacitance of the cartridge of your turntable connected to the PHONO 1 INPUT jacks. Set this knob as follows: Cartridge capacitance Position 0 - 300pF 300 - 350pF 350 - 400pF Over 400pF normal + 50pf +100pf +200pf CARTRIDGE SELECTOR (cartridge) For selection between MM and MC type cartridges. If your turntable uses an MC type cartridge, connect it to the PHONO 2 INPUT jacks and depress this switch. If your turntable uses an MM type cartridge, connect it to the PHONO 1 INPUT jacks and release this switch. D( • DI - SUBSONIC FILTER SWITCH (subsonic) For filtering very low frequencies. When depressed, the subsonic filter is validated to prevent distortion resulting from turntable rumble and speaker damage caused by superlow tones. VOLUME CONTROL KNOB (VOLUME) For increase/decrease of the sound volume. Clockwise turn increases the sound volume, and counterclockwise turn decreases it. Set this knob at a minimum level before turning the power on to prevent speaker from being damaged by a sudden booming sound. LOUDNESS SWITCH (loudness) For emphasis of the low and high frequency ranges to enable impressive reproduction when listening at a low sound volume. TAPE OUT SELECTOR (TAPE OUT) For selection of output signal at the TAPE 1/2 OUTPUT jacks. (See special operation for details.) HIGH CUT FILTER SWITCH (high cut) For attenuation of high frequency noise. At depressed position, the high cut filter is validated to cut off high frequency noise such as tape hissing sound. 5