Hayward PowerFlo Matrix Models: SP1591 SP1592 SP15922S SP1592FT SP1592FTTL - Page 2

Important Safety Instructions, Read And Follow All Instructions, In This Owner's Manual And On, - pool pump

Get Hayward PowerFlo Matrix PDF manuals and user guides View all Hayward PowerFlo Matrix manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

Power-Flo Matrix™ Pump Series PRODUCT REGISTRATION (Retain For Your Records) DATE OF INSTALLATION INITIAL PRESSURE GAUGE READING (CLEAN FILTER PUMP MODEL HORSEPOWER FILTER MODEL SERIAL NUMBER IMPORTANT SAFETY INSTRUCTIONS When installing and using this electrical equipment, basic safety precautions should always be followed, including the following: Failure to follow instructions may result in injury. READ AND FOLLOW ALL INSTRUCTIONS IN THIS OWNER'S MANUAL AND ON EQUIPMENT. KEEP SAFETY LABELS IN GOOD CONDITION AND REPLACE IF MISSING OR DAMAGED. WARNING - To reduce risk of injury, do not permit children to use or climb on this product. The ANSI/NSPI 4 Standard (above-ground and on-ground pools) advises that components such as the filtration system, pumps, and heaters be positioned to prevent their being used as a means of access to the pool by young children. Closely supervise children at all times. CAUTION - The Power-Flo Matrix™ Pump Series is intended for use on permanently installed above-ground swimming pools and may also be used with hot tubs and spas if so marked. Do NOT use with storable pools. A permanently installed pool is constructed in or on the ground or in a building such that it cannot be readily disassembled for storage. A storable pool is constructed so that it is capable of being readily disassembled for storage and reassembled to its original integrity. Though this product is designed for outdoor use, it is strongly advised to protect the electrical components from the weather. Select a well-drained area, one that will not flood when it rains. It requires free circulation of air for cooling. Do not install in a damp or non-ventilated location. Bond motor to pool structure. Use a solid copper conductor, size or larger. Run wire from external bonding lug to reinforcing rod or mesh. Connect a No. 8 AWG (8.4 mm²) solid copper bonding wire to the pressure wire connector provided on the motor housing and to all metal parts of swimming pool, spa, or hot tub, and to all electrical equipment, metal piping or conduit within 5 ft. (1.5 m) of inside walls of swimming pool, spa, or hot tub. (In Canada use No. 6 AWG bonding wire.)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
Power-Flo Matrix
™
Pump Series
____________________
IMPORTANT SAFETY INSTRUCTIONS
When installing and using this electrical equipment, basic safety precautions should always be
followed, including the following: Failure to follow instructions may result in injury.
READ AND FOLLOW ALL INSTRUCTIONS
IN THIS OWNER’S MANUAL AND ON
EQUIPMENT.
KEEP SAFETY LABELS IN GOOD CONDITION AND
REPLACE IF MISSING OR DAMAGED.
WARNING
–
To reduce risk of injury, do not permit children to use or climb on this
product.
The ANSI/NSPI 4 Standard (above-ground and on-ground pools) advises that
components such as the filtration system, pumps, and heaters be positioned to prevent their being
used as a means of access to the pool by young children.
Closely supervise children at all times.
CAUTION
–
The Power-Flo Matrix™ Pump Series is intended for use on permanently
installed above-ground swimming pools and may also be used with hot tubs and spas if so
marked.
Do NOT use with storable pools.
A permanently installed pool is constructed in or on
the ground or in a building such that it cannot be readily disassembled for storage.
A storable
pool is constructed so that it is capable of being readily disassembled for storage and reassembled
to its original integrity.
Though this product is designed for outdoor use, it is strongly advised to protect the electrical
components from the weather.
Select a well-drained area, one that will not flood when it rains.
It
requires free circulation of air for cooling.
Do not install in a damp or non-ventilated location.
Bond motor to pool structure.
Use a solid copper conductor, size or larger.
Run wire from
external bonding lug to reinforcing rod or mesh.
Connect a No. 8 AWG (8.4 mm²) solid copper
bonding wire to the pressure wire connector provided on the motor housing and to all metal parts
of swimming pool, spa, or hot tub, and to all electrical equipment, metal piping or conduit within
5 ft. (1.5 m) of inside walls of swimming pool, spa, or hot tub.
(In Canada use No. 6 AWG
bonding wire.)
PRODUCT REGISTRATION
(Retain For Your Records)
DATE OF INSTALLATION ____________________
INITIAL PRESSURE GAUGE READING (CLEAN FILTER)
_______________________
PUMP MODEL
________________
HORSEPOWER
_______________________
FILTER MODEL ________________
SERIAL NUMBER
_______________________