Hayward RC9742WCCUBY Robotic Cleaners Troubleshooting Guide - Page 44
Runs only a few seconds or minutes, Cord twisting
View all Hayward RC9742WCCUBY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Troubleshooting Runs only a few seconds or minutes • Make sure the machine is submerged in the water. An out of water detection within a few minutes will cause the machine to stop if not completely submerged. • Check electrical source for proper voltage. • If using an extension cord, test for proper voltage. An extension cord is not recommended. • Check for missing or broken impeller blades. • Check for pump impeller obstruction. • Check pump impeller for hard rotation and pump motor binding. Cord twisting • Alternate handle position with each use. • Be sure machine is not getting caught on obstructions in the pool such as raised drains, in floor cleaning heads, toys, etc. Page 41
Runs only a few seconds or minutes
•
Alternate handle position with each use.
•
Be sure machine is not getting caught on obstructions in the pool such as raised
drains, in floor cleaning heads, toys, etc.
Cord twisting
Troubleshooting
Page 41
•
Make sure the machine is submerged in the water. An out of water detection within a
few minutes will cause the machine to stop if not completely submerged.
•
Check electrical source for proper voltage.
•
If using an extension cord, test for proper voltage. An extension cord is not
recommended.
•
Check for missing or broken impeller blades.
•
Check for pump impeller obstruction.
•
Check pump impeller for hard rotation and pump motor binding.