Hayward Sense and Dispense Model: AQL-CHEM - Page 10
Pro Logic operating with software version 4.00 or later
View all Hayward Sense and Dispense manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
120 VAC Load to Neutral on GFCB to Line on GFCB Pigtail 120 VAC GFCB use watertight strain relief here 120VAC pH dispense Pigtail (included with AQL-CHEM) to AQL-CHEM2 Pro Logic operating with software version 4.00 or later Pro Logics operating with software version 4.00 or later have built-in support for the AQL-CHEM2 or other 120VAC pH dispensing devices. A screw terminal block mounted inside of the Pro Logic enclosure offers a dedicated connection to the 120VAC pigtail or device. The diagram below shows typical wiring information for these Pro Logic units. factory wiring N L1 Pigtail 120VAC pH dispense Pigtail (included with AQL-CHEM) use watertight strain relief here to AQL-CHEM2 9
9
Pro Logic operating with software version 4.00 or later
Pro Logics operating with software version 4.00 or later have built-in support for the
AQL-CHEM2 or other 120VAC pH dispensing devices. A screw terminal block mounted
inside of the Pro Logic enclosure offers a dedicated connection to the 120VAC pigtail
or device.
The diagram below shows typical wiring information for these Pro Logic
units.
Pigtail
to AQL-CHEM2
120VAC
pH dispense Pigtail
(included with AQL-CHEM)
use watertight
strain relief here
factory wiring
N
L1
to Line
on GFCB
to Neutral
on GFCB
Pigtail
to AQL-CHEM2
120 VAC Load
120 VAC
GFCB
pH dispense Pigtail
(included with AQL-CHEM)
use watertight
strain relief here
120VAC