Hayward Sense and Dispense Model: AQL-CHEM - Page 4
Side mounting AQL-CHEM to the Aqua Rite Pro, Side mounting AQL-CHEM to Pro Logic - probes
View all Hayward Sense and Dispense manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Aqua Rite Pro Side mounting AQL-CHEM to the Aqua Rite Pro: Side mounting the AQL-CHEM will require drilling 3 mounting holes through the Aqua Rite Pro enclosure. Dimples have been pre-punched on the enclosure at the drilling location (template not needed). After drilling, be sure to remove any burrs and brush away any metal shavings. Route Probe Cell cable through the access hole at the bottom of the mounting bracket BEFORE screwing the bracket in place. For easiest installation, fasten the nylon lock nut loosely, then slip the bracket keyhole slots over the bolt head and tighten. After installation, coil excess cable in the Aqua Rite Pro enclosure. Refer to the diagram below. metal washer rubber washer Aqua Rite Pro enclosure wall Side Mounting AQL-CHEM to Aqua Rite Pro AQL-CHEM bracket wall Route probe cell cable through access hole BEFORE mounting. Zip Tie and store extra cable length here Pro Logic Side mounting AQL-CHEM to Pro Logic: Side mounting the AQL-CHEM will require drilling 3 mounting holes through the Pro Logic enclosure. A drill template is included with the AQL-CHEM to assist with the positioning of the holes. After drilling, be sure to remove any burrs and brush away any metal shavings. Route Probe Cell cable through the access hole at the bottom of the mounting bracket BEFORE screwing the bracket in place. For easiest installation, fasten the nylon lock nut loosely, then slip the bracket keyhole slots over the bolt head and tighten. After installation, coil excess cable in the Pro Logic enclosure. Refer to the diagram below. metal washer rubber washer Pro Logic enclosure wall Side Mounting AQL-CHEM to Pro Logic AQL-CHEM bracket wall Route probe cell cable through access hole BEFORE mounting. Zip Tie and store extra cable length here 3