Hayward SwimClear™ Models: C2030 C3030 C4030 C5030 C7030 - Page 9
Problem Solving List - swimclear cartridge pool filter
View all Hayward SwimClear™ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
SERVICE AND REPAIRS Consult your local authorized Hayward dealer or service center. No returns may be made directly to the factory without the expressed written authorization of Hayward Pool Products. SUGGESTED POOL CHEMISTRY LEVELS pH 7.2 to 7.8 TOTAL ALKALINITY 80 to 120 ppm CALCIUM HARDNESS 200 to 400 ppm COMBINED CHLORINE .2 ppm Maximum CHLORINE (STABILIZED) 1.0 to 3.0 ppm CHLORINE STABILIZER (Cyanuric Acid) 60 to 80 ppm PROBLEM SOLVING LIST REMEDY LOW WATER FLOW 1. Check skimmer and pump strainer baskets for debris. 2. Check for restrictions in intake and discharge lines. 3. Check for air leak in intake line (indicated by bubbles returning to pool). SHORT FILTER CYCLES 1. Check for algae in pool and super-chlorinate as required. 2. Be sure chlorine and pH levels are in proper range (adjust as required). POOL WATER WON'T CLEAR UP 1. Check chlorine, pH and total alkalinity levels and adjust as required. 2. Be sure flow rate through filter is sufficient. 3. Operate filter for longer periods. Page 9 of 12 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS SWIMCLEAR™ CARTRIDGE FILTER ISC2031 REV A