HealthRider 1175 P Instruction Manual - Page 5

PROBLEM: The chest pulse sensor does not function properly SOLUTION: a. If the chest pulse sensor does not function properly, see CHEST PULSE SENSOR TROUBLESHOOTING on page 10. b. If the chest pulse sensor still does not function properly, the battery should be changed. To replace the battery, locate the battery cover b on the back of the sensor unit. Insert a coin into the slot in the cover and turn the cover counterclockwise to the "open" position. Remove the cover. Next, remove the old battery from the sensor unit. Insert a new CR 2032 battery, making sure that the writing is on top. In addition, make sure that the rubber gasket is in place in the sensor unit. Replace the battery cover and turn it to the closed position. CR2032 Battery Rubber Gasket 28 BEFORE YOU BEGIN Thank you for selecting the new HealthRider® 1175 P treadmill. The 1175 P treadmill combines advanced technology with innovative design to help you get the most from your exercise program in the convenience of your home. And when you're not exercising, the unique 1175 P treadmill can be folded up, requiring less than half the floor space of other treadmills. For your benefit, read this manual carefully before using the treadmill. If you have questions after reading this manual, please call our Customer Service Department at 08457 089 009. To help us assist you, please note the product model number and serial number before calling. The model number is HETL62140. The serial number can be found on a decal attached to the treadmill (see the front cover of this manual for the location). Before reading further, please review the drawing below and familiarise yourself with the parts that are labelled. Water Bottle Holder (Bottle not included) Pulse Sensor Latch Knob Weight Rack LEFT SIDE Book Holder Console Handrail Key/Clip Circuit Breaker On/Off Switch RIGHT SIDE Foot Rail Walking Belt Power Cord Front Wheel Adjustable Cushioned Walking Platform Rear Roller Adjustment Bolts 5