HealthRider 990 S Instruction Manual - Page 7
Identify the Left Pedal 13. Attach the Left Pedal to
View all HealthRider 990 S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
HOW TO USE THE INFORMATION MODE The console features an information mode that keeps track of the total number of hours that the elliptical crosstrainer has been used and the total number of miles (or kilometres) pedaled. The information mode also allows you to select miles or kilometres as the unit of measurement for speed and distance. To access the information mode, press and hold the On/Reset button for about six seconds. When the information mode is selected, an E for English miles or an M for metric kilometres will appear in the display. To change the unit of measurement, press the + button. Press the Display Mode button. The display will then show the total number of hours that the elliptical crosstrainer has been used. Press the Display Mode button again. The display will then show the total number of miles (or kilometres) pedaled. To exit the information mode, press the On/Reset button again. 8. Identify the Left Pedal (13). Attach the Left Pedal to the 8 left Pedal Spring (14) with an Adjustment Bolt (20), an M10 Washer (38), and an Adjustment Knob (15) as 20 shown. Note: The Left Pedal can be attached in several positions using the five positions in the Left Pedal and the three holes in the Pedal Spring (see HOW TO 13 ADJUST THE PEDALS on page 10). Attach the Right Pedal (not shown) in the same way. Make sure that both Pedals are in the same hole and in the same pedal position. 14 38 15 9. Make sure that all parts of the elliptical crosstrainer are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical crosstrainer. 22 7