HealthRider H105t Treadmill English Manual - Page 11
Attach the Pulse Bar Top 86 to the Pulse Bar
View all HealthRider H105t Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
10. With the help of a second person, hold the Pulse Bar Top (86) near the Pulse Bar Bottom 10 (87). Insert the pulse wire from the Pulse Bar Top into the hole in the top of the Pulse Bar Bottom and pull it out of the hole in the Pulse Bar Bottom. Attach the Pulse Bar Top (86) to the Pulse Bar Bottom (87) with two #8 x 3/4" Screws (2) and six #8 x 1/2" Screws (1) in the locations shown. Be careful not to pinch the pulse wire. Start all eight Screws, and then tighten each of them. 86 1 87 1 1 Pulse Wire 1 2 1 1 2 11. With the help of a second person, hold the 11 Left and Right Handrails (81, 82) near the Base (91). Slide the lower ends of the Handrails into 81 the holes on the top of the Right and Left Base Covers (84, not shown). 82 84 91 11