HealthRider H105t Treadmill English Manual - Page 8

4. Hold the Left Upright (88) against the Base 4 (91). Be careful not to pinch the Upright Wire (77) or the Ground Wire (90). Insert two 3/8" x 2 3/4" Patch Bolts (7) and two 3/8" x 1 1/4" Patch Bolts (8) with two 3/8" Star Washers (13) into the Left Upright. Partially tighten the 3/8" x 2 3/4" Patch Bolts (7) and the 3/8" x 1 1/4" Patch Bolts (8) until the heads of the Patch Bolts touch the Left Upright (88); do not fully tighten the Patch Bolts yet. Note: It may be helpful to use the Short Hex Key (109) on the Bolt shown. Attach the Right Upright (not shown) in the same way. Note: There are no wires on the right side. 7 109 13 8 77, 90 8 13 91 5. Identify the Left and Right Base Covers (83, 84). 5 Slide the Left Base Cover onto the Left Upright 77 (88). Slide the Right Base Cover onto the Right Upright (89). Do not press the Base Covers into place yet. Remove the wire tie from the Upright Wire (77). 88 Wire Tie 88 89 84 83 8