HealthRider H45e Elliptical Enc Manual - Page 15

HOW TO USE THE SOUND SYSTEM THE SETTINGS MODE To play music or audio books through the console sound system while you exercise, plug a 3.5 mm male to 3.5 mm male audio cable (not included) into the jack on the console and into a jack on your MP3 player, CD player, or other personal audio player; make sure that the audio cable is fully plugged in. Note: To purchase an audio cable, see your local electronics store. The console features a settings mode that allows you to view console usage information and to turn on or turn off the demo mode. To select the settings mode, press and hold down the Performance Workouts button for a few seconds until the settings information appears in the display. Next, press the play button on your personal audio player. Adjust the volume level using the volume increase and decrease buttons on the console or the volume control on your personal audio player. The left display will show the total number of hours that the console has been used since the elliptical was purchased. The right display will show the total distance that the elliptical has been pedaled. The console features a display demo mode, designed to be used if the elliptical is displayed in a store. While the demo mode is turned on, the console will show a preset presentation when it is not in use. If the demo mode is turned on, a "d" will appear in the right display. To turn on or turn off the demo mode, press the volume decrease button. To exit the settings mode, press the Performance Workouts button. 15