HealthRider H45e Elliptical Enc Manual - Page 6
ASSEMBLY, Attach the Rear Stabilizer 70 to the Frame
View all HealthRider H45e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • In addition to the included tool(s), assembly requires the following tool(s): one rubber mallet Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.iconservice.ca/CustomerService/ registration and register your product. 1 • activates your warranty • saves you time if you ever need to contact Customer Service • allows us to notify you of upgrades and offers Note: If you do not have Internet access, call Customer Service (see the front cover of this manual) and register your product. 2. If there are shipping supports on the rear of the Frame (1), remove the screws from the shipping supports, and discard the screws and the shipping supports. With the help of another person, place some packing inserts from the packing material under the rear of the Frame (1) so that the Frame is lifted off the floor. Have another person hold the elliptical to prevent it from moving from side to side until this step is completed. Next, identify the Rear Stabilizer (70), which has Wheels (50), and orient it as shown. Attach the Rear Stabilizer (70) to the Frame (1) with two M10 x 120mm Screws (84). Then, remove the packing inserts and lower the Rear Stabilizer. 2 70 50 84 1 50 6