HealthRider H95e Elliptical English Manual - Page 21
How To Adjust The Drive Belt
View all HealthRider H95e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
HOW TO ADJUST THE DRIVE BELT If you can feel the pedals slip while you are pedaling, even when the resistance is adjusted to the highest level, the drive belt may need to be adjusted. To adjust the drive belt, first unplug the power cord. Lift the Latch (50) on the underside of the Left Pedal Arm (13), and then lift the Left Pedal Arm off the left Pedal Arm Sleeve (46). Next, remove the indicated M8 x 25mm Screw (121), Large Axle Cover (113), M8 Washer (95), and Pedal Arm Sleeve (46). Using a flat screwdriver, carefully pry the left Disc (17) off the elliptical. 97 38 13 17 85 50 46 113 121 46 95 Next, loosen the Pivot Screw (97). Tighten the Belt Adjustment Screw (85) until the Drive Belt (38) is tight. When the Drive Belt is tight, tighten the Pivot Screw. When you are finished, reattach the left disc and plug in the power cord. 21