HealthRider H95e Elliptical English Manual - Page 9

6. See drawing 6a. Locate the Pedal Arm Roller 6a (32) on the Right Pedal Arm (12). Set the Pedal Arm Roller on the Ramp (130). See drawing 6b. Apply grease to the axle on the right Crank Arm (39). Orient a Pedal Arm Sleeve (46) so that the flat side is facing the elliptical. Slide the Pedal Arm Sleeve onto the axle on the right Crank Arm (39). Attach the Pedal Arm Sleeve with an M8 x 25mm Screw (121), a Large Axle Cover (113), and an M8 Washer (95). Next, pull upward on the Latch (50) on the Right Pedal Arm (12). Press the Right Pedal Arm onto the Pedal Arm Sleeve (46). Make sure that the Right Pedal Arm latches into place. 12 Repeat this step on the other side of the elliptical. 6b 130 32 12 Grease 39 Flat 46 Side 50 95 113 121 7. Press the Ramp Cover (131) downward onto the Ramp (130). 7 131 130 9