HealthRider Hrel0998 Instruction Manual - Page 15
Maintenance And Trouble-shooting
View all HealthRider Hrel0998 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
5 Measure your heart rate if desired See step 5 on page 12. 6 When you are finished exercising, the console will automatically turn off after ten minutes If the pedals are not moved and the console but- tons are not pressed for ten minutes, the console will automatically switch into a ÒsleepÓ mode. Make sure to unplug the power cord after each use. MAINTENANCE AND TROUBLE-SHOOTING Inspect and tighten all parts of the elliptical crosstrainer regularly. Replace any worn parts immediately. For smooth operation of the elliptical crosstrainer, the Incline Frame incline frame should be kept clean. Using a soft cloth and mild detergent, clean dust and other residue from the incline frame where the wheels make contact with it. Other parts of the elliptical crosstrainer can also be cleaned in this man- ner. Never use abrasives or solvents. HOW TO LEVEL THE ELLIPTICAL CROSSTRAINER If the elliptical crosstrainer does not sit flat on the floor, one or both of the leveling pads Jam Pad Nut should be adjusted. First, loosen the jam nut on each leveling pad. Next, turn the leveling pads as needed until the elliptical crosstrainer is level. When the leveling pads are properly adjusted, firmly retighten the jam nuts. PULSE SENSOR TROUBLE-SHOOTING ¥ Avoid moving your hands while using the pulse sensor. Excessive movement may interfere with heart rate readings. ¥ Do not hold the metal contacts too tightly; doing so may interfere with heart rate readings. ¥ For the most accurate heart rate reading, hold the metal contacts for about 15 seconds. ¥ For optimal performance of the pulse sensor, keep the metal contacts clean. The contacts can be cleaned with a soft clothÑnever use alcohol, abrasives, or chemicals. MOVING THE ELLIPTICAL CROSSTRAINER Before moving the elliptical crosstrainer, adjust the incline to the highest setting by pressing the INCLINE v button. Wait until the incline frame has stopped moving and then unplug the power cord. Handlebar Incline Frame Stand in front of the elliptical crosstrainer, hold the handlebar firmly, and tip the Rollers elliptical crosstrainer forward until it can be moved on the two front rollers. Carefully move the elliptical crosstrainer to the desired location. 15