HealthRider Hrel0998 Instruction Manual - Page 5

ASSEMBLY Assembly requires two people. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. The following tools are required for assembly: the included allen wrenches and your own phillips screwdriver adjustable wrench and rubber mallet . As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page18. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled. M8 Split Washer (85)Ð4 M10 Split Washer (73)Ð4 M8 Washer (89)Ð4 Curved Washer (74)Ð4 M10 Flat Washer (94)Ð5 M4 x 16mm Screw (60)Ð5 M4 x 16mm Flange Screw (88)Ñ6 M8 x 19mm Button Screw (76)Ð4 Console Plate Screw (39)Ð4 M10 Nylon Locknut (55)Ð6 Patch Bolt (90)Ð1 Handlebar Bolt (92)Ð4 Carriage Bolt (2)Ð2 5