HealthRider Hrel0998 Instruction Manual - Page 9

11. Apply a small amount of grease to the axle on the left 11 Crank Arm (8). Side a Nylon Washer (78) and the Left Pedal Leg (5) onto the axle on the left Crank Arm (8). Note: It may be helpful to use a rubber mallet to tap these parts on. Be careful not to confuse the Left Pedal Leg with the Right Pedal Leg (not shown); look at the position of the round tube to correctly identify the Left Pedal Leg. Next, tap a 3/4Ó Axle Cap (40) onto the axle. Attach the Right Pedal Arm (not shown) in the same way. Grease 5 8 78 40 Round Tube 12. Make sure that all parts of the elliptical crosstrainer are properly tightened. Note: There may be some hardware left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical crosstrainer. 9