HealthRider Hrivex87314 Instruction Manual - Page 14

decrease buttons on the console or the volume control on your personal audio player. THE OPTIONAL CHEST HEART RATE MONITOR Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the best results is to maintain the proper heart rate during your workouts. The optional chest heart rate monitor will enable you to continuously monitor your heart rate while you exercise, helping you to reach your personal fitness goals. To purchase a chest heart rate monitor and receiver, please see the front cover of this manual. HOW TO CHANGE CONSOLE SETTINGS 1. Select the settings mode. To select the settings mode, press and hold the Settings button until the settings information appears in the display.  Demo-The console features a display demo mode, designed to be used if the elliptical is displayed in a store. Press the Enter button repeatedly to turn the demo mode ON or OFF.  Contrast Level-The currently selected contrast level will appear in the display. Press the Resistance increase and decrease buttons to adjust the contrast level.  Trainer Voice-The currently selected setting for the audio coach will appear in the display. Press the Enter button repeatedly to turn the audio coach ON or OFF. Default Menu-The default menu will appear when you press the Home button. Press the Enter button repeatedly to select the manual mode or the iFit menu as the default menu.  Check Status-The words CHECK WIFI STATUS or CHECK USB STATUS will appear in the display. Press the Enter button. After a few seconds, the status of the iFit module will appear in the display. To exit this display, press the Settings button.  Send/Receive-The words SEND/RECEIVE DATA will appear in the display. Press the Enter button. The console will then check for iFit workouts and firmware downloads. The display will show the total number of hours that the elliptical has been used and the total distance (in miles or kilometers) that has been pedaled on the elliptical. If an iFit module is connected to the console, the display will show the words WIFI MODULE or USB MODULE. If no module is connected, the display will show the words NO IFIT MODULE. If no module is connected, some of the settings options will not be available. 2. Navigate the settings mode. While the settings mode is selected, the matrix of the display will display several optional screens. Press the decrease button next to the Enter button repeatedly to select the desired optional screen. The lower section of the display will show instructions for the selected screen. Make sure to follow the instructions shown in the lower part of the display. 4. Exit the settings mode. Press the Settings button to exit the settings mode. HOW TO CHANGE CONSOLE SETTINGS 1. Select the settings mode. To select the settings mode, press and hold the Settings button until the settings information appears in the display. The display will show the total number of hours that the elliptical has been used and the total distance (in miles or kilometers) that has been pedaled on the elliptical. If an iFit module is connected to the console, the display will show the words WIFI MODULE or USB MODULE. If no module is connected, the display will show the words NO IFIT MODULE. If no module is connected, some of the settings options will not be available. 3. Change settings as desired. 2. Navigate the settings mode.  Units-The currently selected unit of measurement will appear in the display. To change the unit of measurement, press the Enter button repeatedly. To view distance in miles, select ENGLISH. To view distance in kilometers, select METRIC. While the settings mode is selected, the matrix of the display will display several optional screens. Press the decrease button next to the Enter button repeatedly to select the desired optional screen. 14