HP 1000-1400 HP 1000 Notebook PC and Compaq CQ45 Notebook PC - Maintenance and - Page 95

USB board see, Power connector cable see

Page 95 highlights

Description ● For use in models without Windows 8 ● For use in models with Windows 8 Standard ● For use in models with Windows 8 Professional Thermal pad (for use with all models) Spare part number 685783-001 685783-501 685783-601 651046-001 Before removing the system board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the following components: ● WLAN module (see WLAN module on page 49) ● Hard drive (see Hard drive on page 54) ● Keyboard (see Keyboard on page 60) ● Top cover (see Top cover on page 63) ● Speakers (see Speakers on page 71) ● USB board (see USB board on page 73) ● Power connector cable (see Power connector cable on page 75) 6. Disconnect the display cable from the system board (see Display assembly on page 77). NOTE: When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● Memory module (see Memory module on page 52) ● RTC battery (see RTC battery on page 57) ● Fan/heat sink assembly (see Fan/heat sink assembly on page 92) ● Processor (Intel only; see Processor on page 98) NOTE: AMD processors come soldered to the system board and cannot be removed or replaced. Component replacement procedures 87

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140

Description
Spare part number
For use in models without Windows 8
685783-001
For use in models with Windows 8 Standard
685783-501
For use in models with Windows 8 Professional
685783-601
Thermal pad (for use with all models)
651046-001
Before removing the system board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
41
).
5.
Remove the following components:
WLAN module (see
WLAN module
on page
49
)
Hard drive (see
Hard drive
on page
54
)
Keyboard (see
Keyboard
on page
60
)
Top cover (see
Top cover
on page
63
)
Speakers (see
Speakers
on page
71
)
USB board (see
USB board
on page
73
)
Power connector cable (see
Power connector cable
on page
75
)
6.
Disconnect the display cable from the system board (see
Display assembly
on page
77
).
NOTE:
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
Memory module (see
Memory module
on page
52
)
RTC battery (see
RTC battery
on page
57
)
Fan/heat sink assembly (see
Fan/heat sink assembly
on page
92
)
Processor (Intel only; see
Processor
on page
98
)
NOTE:
AMD processors come soldered to the system board and cannot be removed or replaced.
Component replacement procedures
87