HP 11-ab000 Maintenance and Service Guide - Page 36
Removal and replacement procedures, Bottom cover
View all HP 11-ab000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
5 Removal and replacement procedures CAUTION: Components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the computer or void the warranty. NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Component replacement procedures NOTE: Details about the computer, including model, serial number, product key, and length of warranty, are on the service tag on the back of the computer. See Labels on page 14 for details. This chapter provides removal and replacement procedures. There are as many as 56 screws that must be removed, replaced, and/or loosened when servicing the computer. Make special note of each screw size and location during removal and replacement. Bottom cover NOTE: The bottom cover spare part kit includes 4 rubber feet, grounding pads, hard drive pads, and shielding. Description Bottom cover in aqua blue finish Bottom cover in jet black finish Bottom cover in snow white finish Bottom cover in violet purple finish Bottom cover in infinity purple finish Spare part number 908296-001 906782-001 912833-001 908295-001 L21647-001 Before disassembling the computer, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. Remove the bottom cover: 1. Close the computer. 2. Turn the computer upside down with the front toward you. 3. Detach the two rear rubber feet (1). The rubber feet are available in the Rubber Kit, using the following spare part numbers: 28 Chapter 5 Removal and replacement procedures