HP 11-ab000 Maintenance and Service Guide - Page 69
from the webcam/microphone module., Release the adhesive support strip
View all HP 11-ab000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
d. Detach the webcam/microphone module (2) from the display bezel. (The webcam/microphone module is attached to the display bezel with double-sided adhesive.) e. Remove the webcam/microphone module. The webcam/microphone module is available using spare part number 907345-001. 16. If it is necessary to replace the display panel cable: a. Remove the display panel assembly. CAUTION: Before turning the display panel assembly upside down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display panel assembly. b. Disconnect the webcam/microphone module cable (1) from the webcam/microphone module. c. Release the adhesive support strip (2) that secures the display panel cable to the display panel. d. Disconnect the display panel cable (3) from the display panel. e. Release the display panel cable from the retention clips (4) and routing channel built into the display panel assembly. Component replacement procedures 61