HP 15-ay000 Maintenance and Service Guide - Page 68
Hard drive, Remove the optical drive see
View all HP 15-ay000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket, cable, or connector board. Description Hard drive for use in HP Notebook PC models: 2-TB, 5400-rpm, hybrid 8 GB SSD, 9.5 mm 1-TB, 5400-rpm, 2.5-inch (for use in India) Hard drive for use in HP Notebook PC and HP 250/256 G5 Notebook PC models: 1-TB, 5400-rpm, hybrid 8 GB SSD 1-TB, 5400-rpm, 2.5-in 500-GB, 5400-rpm, 7-mm Hard drive for use in HP 250/256 G5 Notebook PC models: 500-GB, 7200-rpm, 7-mm Hard drive connector board Hard drive cable for use in HP Notebook PC models Hard Drive Hardware Kit (ETB) for use in HP 250/256 G5 models Hard Drive Hardware Kit (non-ETB) for use in HP 250/256 G5 models Spare part number 912487-855 676423-855 731999-005 778192-005 778186-005 703267-005 817878-001 855003-001 859515-001 859516-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 48). 5. Remove the optical drive (see Optical drive on page 49), if installed. 6. Remove the bottom cover (see Bottom cover on page 52). To remove the hard drive: 1. Disconnect the hard drive cable from the system board (1). 2. Remove the three Phillips PM2.0×3.0 screws (2) that secure the hard drive assembly to the computer. 60 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts