HP 15-ay000 Maintenance and Service Guide - Page 69
that secure each, bracket to the hard drive.
View all HP 15-ay000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
3. Lift the hard drive assembly from the computer (3). 4. To remove the hard drive connector board, pull the connector away from the drive to remove it (1). 5. To remove the hard drive cable from the connector board, disconnect the cable from the connector on the board and remove it (2). 6. To remove the hard drive brackets, remove the two Phillips PM3.0×3.0 screws (1) that secure each bracket to the hard drive. Component replacement procedures 61
3.
Lift the hard drive assembly from the computer
(3)
.
4.
To remove the hard drive connector board, pull the connector away from the drive to remove it
(1)
.
5.
To remove the hard drive cable from the connector board, disconnect the cable from the connector on
the board and remove it
(2)
.
6.
To remove the hard drive brackets, remove the two Phillips PM3.0×3.0 screws
(1)
that secure each
bracket to the hard drive.
Component replacement procedures
61