HP 15-ay000 Maintenance and Service Guide - Page 72
USB board, Remove the Phillips PM2.0×3.0 screw
View all HP 15-ay000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
USB board Description USB board (includes cable) Spare part number 855010-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 48). 5. Remove the optical drive (see Optical drive on page 49), if installed. 6. Remove the bottom cover (see Bottom cover on page 52). 7. Remove the hard drive, hard drive cable, and hard drive board (see Hard drive on page 60). To remove the USB board: 1. Disconnect the USB board cable from the system board (1) and lift the cable to disengage the adhesive that secures it to the computer.. 2. Remove the Phillips PM2.0×3.0 screw (2) that secures the USB board to the computer. 3. Remove the USB board and cable (3). Reverse this procedure to install the USB board. 64 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts