HP 15-f004dx HP 15 Notebook PC Maintenance and Service Guide - Page 68
Lift the right side of the system board, until it rests at an angle.
View all HP 15-f004dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
2. Remove the two Phillips M2.5×6.5 and M2.0×5.0 screws (1). Remove the bracket (2) that secures the power connector bracket to the base enclosure. 3. Remove the four Phillips M2.5×5.0 screws (1) that secure the system board to the base enclosure. 4. Lift the right side of the system board (2) until it rests at an angle. 58 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
2.
Remove the two Phillips M2.5×6.5 and M2.0×5.0 screws
(1)
. Remove the bracket
(2)
that secures
the power connector bracket to the base enclosure.
3.
Remove the four Phillips M2.5×5.0 screws
(1)
that secure the system board to the base enclosure.
4.
Lift the right side of the system board
(2)
until it rests at an angle.
58
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts