HP 15-f004dx HP 15 Notebook PC Maintenance and Service Guide - Page 77
Power connector cable
View all HP 15-f004dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Power connector cable Description Power connector cable (includes bracket) Spare part number 732067-001 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 29), and then remove the following components: a. Optical drive (see Optical drive on page 34). b. Service door (see Service door on page 30). c. WLAN module (see WLAN module on page 32). d. Memory module (see Memory module on page 31). e. Keyboard (see Keyboard on page 36). f. Top cover (see Top cover on page 42). g. Hard drive (see Hard drive on page 46). h. System board (see System board on page 56). Remove the power connector board: NOTE: The power connector bracket was removed when removing the system board. 1. Turn the system board upside down, with the front toward you. 2. Release the power connector from the clip built into the system board. Component replacement procedures 67