HP 15-f085wm HP 15 Notebook PC Maintenance and Service Guide - Page 76
Speakers, Remove the speakers
View all HP 15-f085wm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Reverse this procedure to install the power connector cable. Speakers Description Speakers (include, speaker cable, and 4 rubber isolators) Spare part number 732084-001 Before removing the speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 28), and then remove the following components: a. Optical drive (see Optical drive on page 33). b. Service door (see Service door on page 29). c. WLAN module (see WLAN module on page 31). d. Memory module (see Memory module on page 30). e. Keyboard (see Keyboard on page 35). f. Top cover (see Top cover on page 41). g. Hard drive (see Hard drive on page 45). h. System board (see System board on page 55). Remove the speakers: ▲ Remove the speakers by lifting up on the clip on the right side speaker and lifting the speakers. Carefully and gently lift the speaker wire connecting the left and right speakers. NOTE: The speaker connection cable was removed when removing the system board. NOTE: The speakers include rubber isolators that are installed in the screw holes. These isolators are crucial to the performance of the speakers. 66 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts