HP 15-g200 Maintenance and Service Guide - Page 53
Reverse this procedure to install the top cover
View all HP 15-g200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
7. Remove the four Phillips PM2.5×5.0 screws (3) that secure the top cover to the computer. 8. Lift the rear edge of the top cover (1) until it disengage from the base enclosure. 9. Remove the top cover (2). Reverse this procedure to install the top cover. Component replacement procedures 45
7.
Remove the four Phillips PM2.5×5.0 screws
(3)
that secure the top cover to the computer.
8.
Lift the rear edge of the top cover
(1)
until it disengage from the base enclosure.
9.
Remove the top cover
(2)
.
Reverse this procedure to install the top cover.
Component replacement procedures
45