HP 15-g200 Maintenance and Service Guide - Page 66
Disconnect the USB board cable from the system board
View all HP 15-g200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
3. Lift the right side of the system board (1), and then pull the board away from the computer enough to disengage the connectors from the side of the base enclosure (2). NOTE: Be careful not to inadvertently disconnect the speaker cable when lifting the system board. 4. Flip the system board upside down to gain access to the speaker connector (1). 5. Disconnect the USB board cable from the system board (2). Reverse this procedure to install the system board. 58 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
3.
Lift the right side of the system board
(1)
, and then pull the board away from the computer enough to
disengage the connectors from the side of the base enclosure
(2)
.
NOTE:
Be careful not to inadvertently disconnect the speaker cable when lifting the system board.
4.
Flip the system board upside down to gain access to the speaker connector
(1)
.
5.
Disconnect the USB board cable from the system board
(2)
.
Reverse this procedure to install the system board.
58
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts