HP 15-g200 Maintenance and Service Guide - Page 57
Hard drive, To remove the hard drive
View all HP 15-g200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket. Description 1-TB, 5400-rpm, 2.5-in 750 GB, 5400 rpm, 2.5 in 500-GB, 5400-rpm, 7-mm Hard drive bracket Spare part number 778192-005 778190-005 778186-005 749648-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 31). 5. Remove the keyboard (see Keyboard on page 35). 6. Remove the top cover (see Top cover on page 43). To remove the hard drive: 1. Remove the two Phillips PM2.5×5.0 screws (1) that secure the hard drive to the computer. 2. Slide the hard drive to disengage it from the connector (2). 3. Lift the hard drive from the computer (3). Component replacement procedures 49