HP 17-x100 17-x099 Models: 17-x100 - 17-x199 - Maintenance and Service Guide - Page 60
Solid-state drive holder and board, Remove the Phillips PM2.0×4.5 screws
View all HP 17-x100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Solid-state drive holder and board Description Solid-state drive holder Solid-state drive board Spare part number 858260-001 856614-001 Before removing the solid-state drive holder and board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34). 5. Remove the optical drive (see Optical drive on page 35). 6. Remove the bottom cover (see Bottom cover on page 41). 7. Remove the solid-state drive (see Solid-state drive on page 51). To remove the solid-state drive holder and board: 1. Remove the Phillips PM2.0×4.5 screws (1) that secures the solid-state drive holder to the computer. 2. Pull the board away from the connector on system board (2), and then remove the solid-state drive holder and board assembly (3). 3. To remove the solid-state drive board from the holder, remove the two Phillips PM2.0×4.0 screws (1) that secure the board to the holder. 52 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts