HP 17-x100 17-x099 Models: 17-x100 - 17-x199 - Maintenance and Service Guide - Page 64
USB board, Disconnect the cable from the USB board
View all HP 17-x100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
USB board Description USB board Spare part number 856613-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34). 5. Remove the optical drive (see Optical drive on page 35). 6. Remove the bottom cover (see Bottom cover on page 41). To remove the USB board: 1. Disconnect the cable from the USB board (1) 2. Remove the Phillips PM2.0×4.0 screw (2) that secures the USB board to the computer. 3. Remove the USB board (3). Reverse this procedure to install the USB board. 56 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts