HP 17-x100 17-x099 Models: 17-x100 - 17-x199 - Maintenance and Service Guide - Page 68
Remove the heat sink, from the system board.
View all HP 17-x100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
3. If you have a model with UMA graphics and a fan integrated in the heat sink: a. Disconnect the fan cable from the system board (1). b. In the order indicated, remove the four Phillips PM2.0×3.0 screws (2) that secure the heat sink to the system board. c. Remove the heat sink (3) from the system board. 4. If you have a model with UMA graphics and no fan integrated in the heat sink: a. In the order indicated, remove the four Phillips PM2.0×3.0 screws (1) that secure the heat sink to the system board. 60 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
3.
If you have a model with UMA graphics and a fan integrated in the heat sink:
a.
Disconnect the fan cable from the system board
(1)
.
b.
In the order indicated, remove the four Phillips PM2.0×3.0 screws
(2)
that secure the heat sink to
the system board.
c.
Remove the heat sink
(3)
from the system board.
4.
If you have a model with UMA graphics and no fan integrated in the heat sink:
a.
In the order indicated, remove the four Phillips PM2.0×3.0 screws
(1)
that secure the heat sink to
the system board.
60
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts