HP 22-b100 Optical Drive Replacement Instructions - Page 2

3. To remove the stand, loosen the two captive screws in the bottom of the stand, and then remove the stand from the computer. 4. To remove the rear cover, remove the Phillips screw located at the bottom of the cover. 5. Starting with the gap at the top of the cover, pry the top (1), left edge (2), and right edge (3) of the cover away from the display assembly in the order shown. 6. To avoid damaging the cable that connects the system board to the rear cover, carefully lift the bottom edge of the cover, and then rotate the cover until it rests upside down next to the display assembly. 7. Locate the optical drive: Hard drive (1) Memory modules (2) Optical drive (3) 8. Disconnect the cable from the drive (1), remove the Phillips screw that secures the drive (2), and then slide the drive out of the computer (3). 852271-001 2