HP 2230s HP Compaq 2230s Notebook PC - Maintenance and Service Guide - Page 63
Fan, that secures the fan to the base enclosure, and then remove
UPC - 884420324256
View all HP 2230s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Fan Removal and replacement procedures Description Fan Spare part number 493269-001 Before removing the fan, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-6). 5. Remove the following components: a. Hard drive (see "Hard drive" on page 4-7) b. Memory module (see "Memory module" on page 4-9) c. WLAN module (see "WLAN module" on page 4-11) d. Optical drive (see "Optical drive" on page 4-15) e. Keyboard (see "Keyboard" on page 4-17) f. Top cover (see "Top cover" on page 4-19) Remove the fan: 1. Disconnect the fan cable 1 from the system board. 2. Loosen the captive Phillips PM2.0×7.0 screw 2 that secures the fan to the base enclosure, and then remove the fan 3 from the heat sink. Reverse this procedure to install the fan. ✎ To properly ventilate the computer, allow at least a 7.6-cm (3-inch) clearance on the left side of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery conservation configurations, battery fast charging, and software requirements. Exhaust air is displaced through the ventilation grill located on the left side of the computer. Maintenance and Service Guide 4-31