HP 4410t HP 4410t Mobile Thin Client - Maintenance and Service Guide - Page 81
Diagnostics menu, System Configuration menu - hard drive
UPC - 884962419915
View all HP 4410t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Computer Setup Diagnostics menu Select Memory Check To do this Run a comprehensive test on system memory. System Configuration menu ✎ Some of the menu items listed in this section may not be supported by your computer. Select Language (or press f2) Boot Options Device Configurations Built-In Device Options Port Options To do this Change the Computer Setup language. ■ Set an f9, f10, and f12 delay when starting up. ■ Enable/disable CD-ROM boot. ■ Enable/disable floppy boot. ■ Enable/disable internal network adapter boot and set the boot mode (PXE). ■ Enable/disable MultiBoot, which sets a boot order that can include most boot devices in the system. ■ Set the Express Boot Popup delay, in seconds. ■ Set the boot order. ■ Swap the functions of the fn key and left ctrl key. ■ Enable/disable USB legacy support. When enabled, USB legacy support allows the following: ❐ Use of a USB keyboard in Computer Setup, even when a Windows operating system is not running ❐ Startup from bootable USB devices, including a hard drive, diskette drive, or optical drive connected by a USB port to the computer ■ Enable/disable embedded WLAN Device Radio. ■ Enable/disable Network Interface Controller (LAN). ■ Enable/disable LAN/WAN switching. ■ Enable/disable Wake on LAN. ■ Enable/disable the optical disc drive. ■ Enable/disable the USB port. ■ Enable/disable the ExpressCard slot. 5-4 Maintenance and Service Guide