HP 450c HP DesignJet 430/450C/488CA Printer - UserÂ’s Guide - Page 28
C/488CA, 488CA
View all HP 450c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Setting up your printer Task 5: Load the print cartridge(s) 3 For each cartridge in the set: a Take the cartridge out of its box. b Remove the colored protective tape and tab from the cartridge's nozzles. 450C/488CA c For the 450C and 488CA, match the color of the cartridge's label with the color of the dot above the stall. d Make sure that the printer is still switched ON. (Never install cartridges with the printer switched off.) e Insert the cartridge in the stall. Press down lightly and push the cartridge away from you until it snaps into place. Yellow Cyan Magenta Black 2 1 2 1 430 450C/ 488CA f If it is installed correctly, the Ready light flashes three times. Otherwise, re-seat it. 1-12
450C/488CA
1–12
3
For each cartridge in the set:
a
Take the cartridge out of its box.
b
Remove the colored protective tape and tab from the cartridge’s nozzles.
c
For the 450C and 488CA, match the color of the cartridge’s label with the color
of the dot above the stall.
d
Make sure that the printer is still switched ON.
(Never install cartridges with
the printer switched off.)
e
Insert the cartridge in the stall.
Press down lightly and push the cartridge away
from you until it snaps into place.
Yellow
Cyan
Magenta
Black
1
2
1
2
430
450C/
488CA
f
If it is installed correctly, the
Ready
light flashes three times.
Otherwise,
re-seat it.
Setting up your printer
Task 5: Load the print cartridge(s)