HP 4700dn HP Color LaserJet 4700 - Software Technical Reference (External) - Page 203

● Rough (90 - 105 g/m2, or 24.7 - 28.8 lb.) ● Heavy Glossy (120 - 160 g/m2, or 32.9 - 43.9 lb.) ● Extra Heavy Glossy (160 - 220 g/m2, or 43.9 - 58 lb.) ● Tough Paper (Glossy Film) ● Envelope The default setting is Unspecified, and the program selects the media type. If you select a different setting, make sure that the correct media type is loaded in the tray that you selected in the Source is: setting. For more information about media types, see the Media attributes section of this manual. When you change the print-driver setting to a media type that is not currently loaded in the product, a control-panel message appears that prompts you to load the media type or choose another tray. Use Different Paper/Covers You can print books that include different media types by using the Use Different Paper/Covers options. When you select the Use Different Paper/Covers check box, the following settings can appear in the group box, along with the associated options: ● Front Cover ● First Page ● Other Pages ● Last Page ● Back Cover NOTE You must use the same size of media for the entire print job. All Use Different Paper/ Covers options use the last Size is: setting that you select in any one of the Use Different Paper/ Covers options. When you change the type and source of the media and covers, the settings that you select remain configured until you close the software program. Each option for the Use Different Paper/Covers setting is described in the following sections. Front Cover Use the Front Cover options to include a blank or preprinted front cover on a document, or to include a front cover from a source tray that is different from the one used for the remainder of the document. The following figure shows the Front Cover setting and options. HP unidrivers for Windows ENWW Paper/Quality tab features 181