HP 5100 HP LaserJet 5100Le printer - User Guide - Page 33
Loading Tray 2, Make sure the paper size setting
UPC - 808736092500
View all HP 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Loading Tray 2 The following instructions are for loading Tray 2. For supported sizes of paper, see page A-5. Note To avoid paper jams, do not load trays while the printer is printing. 1 Pull the tray completely out of the printer. Lift the tray cover. 2 Rotate the dial in the tray so the printer will read the correct size of paper. The toggle switch accesses more sizes. An error might occur if the dial is not set properly. Note Setting the dial adjusts the printer's sensors. It does not adjust the guides inside the tray. 3 Make sure the paper size setting matches the size of paper loaded, or the printer might jam or other errors might occur. 4 Tilt the blue rear guide toward the front of the tray to detach it. Continued on the next page. ENWW Chapter 2: Printing Tasks 29