HP 5100 HP LaserJet 5100Le printer - User Guide - Page 72
Problem Solving, DO NOT POWER OFF - toner cartridge
UPC - 808736092500
View all HP 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Printer Messages (Continued) Message Explanation or Recommended Action FLASH DEVICE FAILURE The flash DIMM had a critical failure and no longer can be used. Remove the flash DIMM and replace it with a new one. FLASH FILE The requested operation could not be performed. You might have OPERATION FAILED attempted an illegal operation, such as trying to download a file to a non-existent directory. FLASH FILE SYSTEM IS FULL Delete files from the flash DIMM or add another one. Download or delete fonts. (See the software help for more information.) FLASH IS The flash DIMM is protected, and no new files can be written to it. WRITE PROTECTED INSTALL TONER CARTRIDGE The print cartridge has been removed and must be replaced for printing to continue. INSTALL TRAY x The printer is unable to print the current job, because the specified tray (x) is open or not inserted correctly. Re-insert the specified tray. LOADING PROGRAM alternates with DO NOT POWER OFF Programs and fonts can be stored on the printer's file system. At bootup time these entities are loaded into RAM. (These entities can take a long time to load into RAM depending on the size and number of entities being loaded.) The specifies a sequence number indicating the current program being loaded. MANUALLY FEED [TYPE] [SIZE] Load the requested paper into Tray 1. Press [Go] if the desired paper is already loaded in Tray 1. Press [-Value+] to scroll through the available types and sizes. Press [Select] to accept the alternate type or size. MEMORY FULL STORED DATA LOST There is no available memory in the printer. The current job might not print correctly and some resources (such as downloaded fonts or macros) might have been deleted. You might want to add more memory to the printer (page C-1). MEMORY SETTINGS CHANGED The printer changed its memory settings because it did not have enough memory to use the previous settings for I/O Buffering and Resource Saving. This usually occurs after removing memory from the printer, or adding a printer language. You might want to change memory settings for I/O Buffering and Resource Saving (although default settings are usually best) or add more memory to the printer (page C-1). 64 Chapter 4: Problem Solving ENWW