HP 5100tn HP LaserJet 5100 Series - User Guide - Page 155
Cfg Tcp/ip=no, Bootp=yes, Dhcp=yes, Bootp=no, Dhcp=no, Cfg Link=no, 10t Half, 10t Full
View all HP 5100tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
EIO Menu (Continued) Item CFG TCP/IP=NO Values NO YES CFG LINK=NO NO YES Explanation NO: The TCP/IP Menu is not accessible. YES: The TCP/IP Menu appears. In the TCP/ IP Menu, you can specify BOOTP=YES or DHCP=YES for TCP/IP parameters to be automatically loaded from a bootp or DHCP server when the printer is turned on. If you specify BOOTP=NO and DHCP=NO , you can manually set selected TCP/IP parameters from the control panel. You can manually set each byte of the IP address (IP), Subnet Mask (SM), Syslog Server (LG), and Default Gateway (GW). For example: Byte 1 192.0.0.192 Byte 4 Byte 2 Byte 3 If the Syslog Server IP address is left blank, the printer will still work. Also, you can manually set the Timeout time period. NO: The 10/100Base-TX link configuration menu will not be accessed. YES: Allows you to access and manually set 10/100Base-TX link parameters. • AUTO: (Default) The print server will automatically configure itself to match the network's link speed and communication mode. • 10T HALF: Sets 10 Mbps, Half-duplex operation on the print server. • 10T FULL: Sets 10 Mbps, Full-duplex operation on the print server. • 100TX HALF: Sets 100 Mbps, Half-duplex operation on the print server. • 100TX FULL: Sets 100 Mbps, Full-duplex operation on the print server. ENWW Control Panel Menus B-19