HP 5100tn HP LaserJet 5100 Series - User Guide - Page 99
Xy.zz Input, Device Failure, Check Cables, And Cycle Power, Nvram Error, Check Settings, Nvram Full
View all HP 5100tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Printer Messages (Continued) Message 66.xy.zz INPUT DEVICE FAILURE alternates with CHECK CABLES AND CYCLE POWER 68 NVRAM ERROR CHECK SETTINGS 68 NVRAM FULL CHECK SETTINGS 69.x PRINTER ERROR 79.xxxx PRINTER ERROR Explanation or Recommended Action An error occurred in an external paper handling device. Press [Go] to clear the message. If the message will not clear, turn the printer off, and then turn the printer on. If this message persists, contact an HP-authorized service or support provider. (See the telephone support flyer included with the printer.) An error occurred in the printer's nonvolatile memory (NVRAM) and one or more printer settings has been reset to its factory default. Print a configuration page and check the printer settings to determine which values have changed (page 105). Hold down [Cancel Job] while turning the printer on. This will clean up the NVRAM by removing old areas that are not being used. If this message persists, contact an HP-authorized service or support provider. (See the telephone support flyer included with the printer.) The printer's nonvolatile memory (NVRAM) is full. Some settings might have been reset to the factory defaults. Print a configuration page and check the printer settings to determine which values have changed (page 105). If this message persists, contact an HP-authorized service or support provider. (See the telephone support flyer included with the printer.) A temporary printing error occurred. Turn the printer off, and then turn the printer on. If this message persists, contact an HP-authorized service or support provider. (See the telephone support flyer included with the printer.) The printer detected an error. The numbers (xxxx) indicate the specific type of error. Turn the printer off, and then turn the printer on. Try printing a job from a different software application. If the job prints, go back to the first application and try printing a different file. (If the message only appears with a certain software application or print job, contact the software vendor for assistance.) If the message persists with different software applications and print jobs, record the numbers that appear (xxxx) and contact an HP-authorized service or support provider. (See the telephone support flyer included with the printer.) ENWW Chapter 4: Problem Solving 91