HP 520 HP 520 Notebook PC - Maintenance and Service Guide - Page 54
Remove the two Phillips PM2.0×9.0 screws, Lift the display assembly straight up and remove it.
View all HP 520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
5. Disconnect the display cable connector(1) from the system board and remove the display panel cable (2) from the clips and routing channel built into the top cover. 6. Remove the wireless antenna cables (3) from the clips and routing channel built into the top cover. 7. Remove the two Phillips PM2.0×9.0 screws (4) that secure the display assembly to the computer. 8. Lift the display assembly straight up and remove it. 46 Chapter 4 Removal and replacement procedures
5
.
Disconnect the display cable connector
(1)
from the system board and remove the display panel
cable
(2)
from the clips and routing channel built into the top cover.
6
.
Remove the wireless antenna cables
(3)
from the clips and routing channel built into the top cover.
7
.
Remove the two Phillips PM2.0×9.0 screws
(4)
that secure the display assembly to the computer.
8
.
Lift the display assembly straight up and remove it.
46
Chapter
4
Removal and replacement procedures