HP 520 HP 520 Notebook PC - Maintenance and Service Guide - Page 71
Remove the PC Card assembly, from the system board.
View all HP 520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
2. Remove the two Phillips PM2.0×7.0 screws (1) and two Phillips PM2.0×4.0 screws (2) that secure the PC Card assembly to the system board. 3. Turn the system board top-side up, with the PC Card eject button toward you. 4. Disengage the slots on the PC Card assembly from the tabs (1) on the PC Card connector. 5. Remove the PC Card assembly (2) from the system board. Reverse this procedure to install the PC Card assembly. Component replacement procedures 63
2
.
Remove the two Phillips PM2.0×7.0 screws
(1)
and two Phillips PM2.0×4.0 screws
(2)
that secure
the PC Card assembly to the system board.
3
.
Turn the system board top-side up, with the PC Card eject button toward you.
4
.
Disengage the slots on the PC Card assembly from the tabs
(1)
on the PC Card connector.
5
.
Remove the PC Card assembly
(2)
from the system board.
Reverse this procedure to install the PC Card assembly.
Component replacement procedures
63